Flaws: On occasion there may be small flaws in the mould which can result in pinhole leaks. The easiest way to check for these is to pour a small amount of wax into the mould and allow it to set, before continuing to pour the remaining wax into the mould slowly. Pinholes will seal quickly when following this method allowing you to use the mould however should you find any major flaws, please keep hold of your clamshells and contact us to discuss.
Points to remember:
- ensure your wax is poured at the correct temperature as recommended above.
- always pour on a protected surface.
- following the above instructions will help minimise loss from minor flaws in the clamshell.
- if you have received faulty, unusable pots, these must be retained for our inspection. Do not discard pots before contacting us first.
The above advice is provided in good faith to assist you in using this product, however it should never take the place of your own personal testing. We do not take responsibility for our test results differing from your test results. NI Candle Supplies is not responsible for any finished products made with our raw ingredients.